CFQTL - LIQUID HARDENER, FEATHER FILL HARDENER, 603

  • MSDS: CFQTL
  • Manufacturer: FIBRE GLASS EVERCOAT CO INC
  • Product Name: LIQUID HARDENER, FEATHER FILL HARDENER, 603
  • National Stock Number: 8010-00N080575
Product Identification

Product ID:LIQUID HARDENER, FEATHER FILL HARDENER, 603
MSDS Date:08/29/1988
FSC:8010
NIIN:00N080575
MSDS Number: CFQTL

Responsible Party
FIBRE GLASS-EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-543-4530

Info Phone: 513-489-7600

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

2-BUTANONE, PEROXIDE; (METHYL ETHYL KETONE PEROXIDE)

CAS: 1338-23-4

RTECS: EL9450000

Fraction By Weight: 50%

OSHA PEL 0.7 PPM, C

ACGIH TLV: 0.2 PPM, C

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


PHTHALIC ACID, DIMETHYL ESTER; (DIMETHYLPHTHALATE) (SARA

CAS: 131-11-3

RTECS: TI1575000

Fraction By Weight: 50%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


0

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION WITH POSSIBLE
PERMANENT EYE INJURY. SKIN: CONTACT MAY CAUSE BURNS. INHALATION:
PROLONGED INHALATION MAY CAUSE MUCOUS MEMBRANE IRRITATION AND
VERTIGO. CHRONIC: MEK PEROXIDES MAY CAUSE BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: RINSE EYES IMMEDIATELY (SECONDS COUNT) W/WATER FOR AT
LEAST 15 MIN. CALL MD AT ONCE. INGEST: DRINK LARGE QUANTITIES OF
MILK OR WATER & OBTAIN MED ATTN IMMED. DO NOT INDUCE VOMIT. SKIN:
WASH AFFE CTED AREAS PROMPTLY W/SOAP & WATER. REMOVE CONTAMD CLTHG
& SHOES. IF SKIN IS IRRITATED, APPLY OINTMENT SUCH AS LANOLIN.
INHAL: REMOVE TO WELL VENTD AREA, THEN IF BRTHG IS STILL DIFFICULT,
CONTACT MD.

Fire Fighting

Flash Point Method:SCC
Flash Point:140F,60C
Extinguishing Media:WATER MOST EFFECTIVE; ALSO, WATER FOG, CARBON
DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:PERSONNEL EVACUATION PRIMARY. BLAZE
FOUGHT FROM A SAFE DISTANCE OR FROM AN EXPLOSION PROTECTED
LOCATION. REMOVE NON-BURNING MATERIAL FROM LOCATION.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND COVER WITH
NON-COMBUSTIBLE MATERIAL (VERMICULITE OR DRY SAND) TO CONTAIN
SPILL. WASH AREA WITH DETERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL PLACE IN ORIGINAL
CONTAINERS AWAY FROM DIRECT SUNLIGHT OR HEAT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATORY PROTECTION SHOULD BE
WORN TO PREVENT INHALATION OF MIST OR HEATED VAPORS.
Ventilation:GENERAL VENTILATION.
Protective Gloves:CHEMICAL RESISTANT POLYETHYLENE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT: & FULL LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:DECOMPOSES
Vapor Density:HVR/AIR
Spec Gravity:1.15
Solubility in Water:NIL
Appearance and Odor:CLEAR MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
METALLIC CONTAMINATION, AMINES, ORGANIC METAL SALTS.
Stability Condition to Avoid:DIRECT SUNLIGHT, FLAME, HEAT, SPARKS,
STATIC ELECTRICITY AND CONFINEMENT UNDER PRESSURE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

Disposal

Waste Disposal Methods:IGNITE FROM A SAFE DISTANCE. ABSORBED WASTES MAY
BE DISPOSED OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.